Paper
18 April 2006 Optimization of erbium-ytterbium fibre laser with simple double-clad structure
Pavel Peterka, Ivan Kašík, Václav Kubeček, Vlastimil Matějec, Miloš Hayer, Pavel Honzátko, Alena Zavadilova, Pavel Dvořáček
Author Affiliations +
Proceedings Volume 6180, Photonics, Devices, and Systems III; 618010 (2006) https://doi.org/10.1117/12.675687
Event: Photonics, Devices, and Systems III, 2005, Prague, Czech Republic
Abstract
The paper deals with optimization of fibre laser based on experimental erbium- and ytterbium-doped fibre with simple double-clad structure pumped by multimode laser diode in 980 nm band. Fibre preparation and its characteristics are described. Different resonator configurations were investigated for the laser optimization, including high reflectivity fibre loop mirror. Experimental optimization ofthe pump wavelength, fibre length and output coupler ratio were carried out. The results obtained under the cladding pumping are compared with those measured with a fibre ring laser containing the same fibre single-mode pumped at 1060 nm.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel Peterka, Ivan Kašík, Václav Kubeček, Vlastimil Matějec, Miloš Hayer, Pavel Honzátko, Alena Zavadilova, and Pavel Dvořáček "Optimization of erbium-ytterbium fibre laser with simple double-clad structure", Proc. SPIE 6180, Photonics, Devices, and Systems III, 618010 (18 April 2006); https://doi.org/10.1117/12.675687
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Mirrors

Output couplers

Resonators

Laser resonators

Cladding

Fabry–Perot interferometers

RELATED CONTENT


Back to Top