Paper
29 March 2006 Newly developed RELACS materials and process for 65 nm nodes
Author Affiliations +
Abstract
We have developed a new ArF-RELACS (Resolution Enhancement Lithography Assisted by Chemical Shrink) material called AZ-LExp.R720. The principle and process procedure of LExp.R720 are almost identical to those previously developed with KrF lithography. The extent of crosslinking reactions and the mobility balance of chemical components at the boundary between resist and the RELACS film is adjusted to ArF resist chemistry. LExp.R720 can vary shrinkage from 10 to 40nm by controlling the process conditions, mainly the mixing bake temperature. The amount of shrinkage is independent of pattern pitch and focus. We confirmed that pattern profile, lithography margin, CD uniformity, etching resistance, and pattern defects were not deteriorated by the RELACS process with deionized water development. L.ExpR720 was able to get an amount of shrinkage with several of ArF resists, which has commercial applications. In conclusion, we believe that LExp.R720 is extremely useful for 65 nm node and next generation devices.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mamoru Terai, Teruhiko Kumada, Takeo Ishibashi, Tetsuro Hanawa, Noboru Satake, and Yusuke Takano "Newly developed RELACS materials and process for 65 nm nodes", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61532I (29 March 2006); https://doi.org/10.1117/12.651242
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Lithography

Etching

Photoresist processing

Polymers

Materials processing

Optical lithography

Back to Top