Analysis of 193nm immersion specific defects

Akihiko Otoguro; Jeung-Woo Lee; Toshiro Itani; Kiyoshi Fujii; Tomohiro Funakoshi; Tsunehiro Sakai; Kenji Watanabe; Mikio Arakawa; Hitoshi Nakano; Masamichi Kobayashi

doi:10.1117/12.656086

11 April 2006 Analysis of 193nm immersion specific defects

Akihiko Otoguro, Jeung-Woo Lee, Toshiro Itani, Kiyoshi Fujii, Tomohiro Funakoshi, Tsunehiro Sakai, Kenji Watanabe, Mikio Arakawa, Hitoshi Nakano, Masamichi Kobayashi

Author Affiliations +

Proceedings Volume 6153, Advances in Resist Technology and Processing XXIII; 61531P (2006) https://doi.org/10.1117/12.656086
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

A great deal of research effort is focused on accelerating the development of 193-nm immersion lithography because it appears to be the most suitable lithographic solution available for 65-nm-and-below semiconductor devices. To realize a 193-nm immersion process, we must find ways to detect and analyze immersion specific defects, and then establish processes that let us avoid such defects. In this paper, we examine immersion specific defects and ways to detect and eliminate them in production processes. Through comparison of dry exposure and immersion exposure processes, we have found that "bridges" and "water-marks" are the most significant immersion specific defects using current developable top-coats. Although we confirmed that the current solvent-removable top-coat process is better for avoiding immersion specific defects, we also found that the defect density with a developable top-coat was still low enough for volume production. We also investigated the causes of immersion specific defects and hypothesized that DI water permeation and the local topology of the top-coat play an important role in the generation of immersion specific defects. To test whether this was so, we evaluated the change in the top-coat film thickness by the quartz crystal microbalance technique. We confirmed that top-coat swelling caused by water permeation into the top-coat film is a major cause of immersion

Citation Download Citation

Akihiko Otoguro, Jeung-Woo Lee, Toshiro Itani, Kiyoshi Fujii, Tomohiro Funakoshi, Tsunehiro Sakai, Kenji Watanabe, Mikio Arakawa, Hitoshi Nakano, and Masamichi Kobayashi "Analysis of 193nm immersion specific defects", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61531P (11 April 2006); https://doi.org/10.1117/12.656086

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available