Paper
3 March 2006 Design optimization of high-speed optical modulators
Author Affiliations +
Abstract
The effects of design parameters on the modulating voltage and optical bandwidth are reported for lithium niobate, GaAs and polymer electro-optic modulators by using rigorous numerical techniques. It is shown that by etching lithium niobate, the switching voltage can be reduced and the bandwidth improved. For a GaAs-based modulator using higher aluminium content in the buffer layer for a given optical loss can shorten the device length. It is also observed that the dielectric loss and impedance matching play a key role in velocity-matched high-speed modulators with low conductor loss. It is also indicated in the work that by using tantalium pentoxide coating, velocity matching can be achieved for GaAs modulators. The effect of non-vertical side wall on the polarisation conversion and single mode operation and the bending loss of polymer rib waveguide for electro-optical modulators are also reported.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. M. Azizur Rahman, Shyqyri Haxha, Vesel Haxha, and Kenneth T. V. Grattan "Design optimization of high-speed optical modulators", Proc. SPIE 6124, Optoelectronic Integrated Circuits VIII, 61240C (3 March 2006); https://doi.org/10.1117/12.652134
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Electrodes

Modulators

Dielectrics

Electrooptic modulators

Microwave radiation

Modulation

RELATED CONTENT

Design optimization of high-speed optical modulators
Proceedings of SPIE (October 02 2006)
Surface Wave Electro-Optic Modulator
Proceedings of SPIE (February 23 1987)
High-bandwidth polymer in-line fiber modulator
Proceedings of SPIE (October 13 1997)

Back to Top