Paper
23 February 2006 Vaporization and deposition of an intact polyimide precursor by resonant infrared pulsed laser ablation
Author Affiliations +
Abstract
Poly(amic acid) (PAA), a precursor to polyimide, was successfully deposited on substrates without reaching curing temperature, by resonant infrared pulsed laser ablation. The PAA was prepared by dissolving pyromellitic dianhydride and 4, 4' oxidianiline in the polar solvent N-methyl pyrrolidinone (NMP). RIR-PLD transferred material showed two distinct geometries, droplets and string-like moieties. The unaltered nature of the deposited PAA was confirmed by Fourier transform infrared spectroscopy (FTIR). Thermal curing was achieved by heating for one hour on a 250°C hotplate, and the transformation to polyimide was demonstrated from changes in the FTIR spectrum following curing. Plume shadowgraphy showed very clear contrasts in the ablation mechanism between ablation of the solvent alone and the ablation of the PAA, with additional contrast shown between the various resonant frequencies used.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. L. Dygert, K. E. Schriver, and R. F. Haglund Jr. "Vaporization and deposition of an intact polyimide precursor by resonant infrared pulsed laser ablation", Proc. SPIE 6107, Laser-based Micropackaging, 61070N (23 February 2006); https://doi.org/10.1117/12.646906
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Polymers

Free electron lasers

FT-IR spectroscopy

Infrared lasers

Infrared radiation

Liquids

Back to Top