Modelling of sacrificial spin-on glass (SOG) etching in non-straight microchannels using hydrofluoric acid

Azrul Azlan Hamzah; Burhanuddin Yeop Majlis; Ibrahim Ahmad

doi:10.1117/12.638572

3 January 2006 Modelling of sacrificial spin-on glass (SOG) etching in non-straight microchannels using hydrofluoric acid

Azrul Azlan Hamzah, Burhanuddin Yeop Majlis, Ibrahim Ahmad

Author Affiliations +

Proceedings Volume 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV; 60371O (2006) https://doi.org/10.1117/12.638572
Event: Microelectronics, MEMS, and Nanotechnology, 2005, Brisbane, Australia

Abstract

This paper studies spin-on glass (SOG) etching in T-shaped microchannels by hydrofluoric acid (HF). Since oxide etching by HF in microchannels is both reaction and diffusion limited, an etching model based on non-first order chemical reaction/steady-state diffusion sacrificial layer etching mechanism is presented to compensate for the etching effect at channel junction. Microchannels are formed on silicon substrate by deep reactive ion etching (DRIE). Samples with channel depth varying from 1μm to 6 μm are prepared by varying exposure time to reactant gas in DRIE chamber. Channel widths prior to the junction are varied from 2 μm to 10 μm while channel width beyond the junction is fixed at 5 μm. The channels are then filled with SOG by multiple spin, bake and cure processes. After etchback planarization using 5% HF solution, the samples are coated with 1.5 μm thick positive photoresist. An etch window is opened at channel fronts to expose underlying SOG. The samples are then time-etched in 5% HF solution and etch front propagation is observed under optical microscope through the transparent photoresist layer. It is observed that SOG etch rate in the microchannels is independent of channel width or channel depth. SOG etch rate at channel's T-junction is 0.67 times lower than etch rate in the straight channels preceding it due to HF concentration variation and etch product transfer rate variation effects. The proposed model fits experimental data well. Offset crosses vent pattern is determined as a good candidate for removing sacrificial oxide under an enclosed cap structure.

Citation Download Citation

Azrul Azlan Hamzah, Burhanuddin Yeop Majlis, and Ibrahim Ahmad "Modelling of sacrificial spin-on glass (SOG) etching in non-straight microchannels using hydrofluoric acid", Proc. SPIE 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV, 60371O (3 January 2006); https://doi.org/10.1117/12.638572

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
11 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Etching

Oxides

HF etching

Data modeling

Diffusion

Optical microscopes

Glasses

Show All Keywords

Keywords/Phrases

Search In:

Publication Years