Erbium-Doped Phosphosilicate Fiber Amplifiers: A comparison of configurations for the optimization of noise figure and conversion efficiency

Li Qian; Ryan Bolen

doi:10.1117/12.628682

13 October 2005 Erbium-doped phosphosilicate fiber amplifiers: a comparison of configurations for the optimization of noise figure and conversion efficiency

Li Qian, Ryan Bolen

Author Affiliations +

Proceedings Volume 5970, Photonic Applications in Devices and Communication Systems; 59702V (2005) https://doi.org/10.1117/12.628682
Event: Photonics North, 2005, Toronto, Canada

Abstract

Extending the amplification bandwidth of erbium-doped fiber amplifiers (EDFAs) is one of the most cost-effective means of expanding the fiber transmission capacity. In conventional aluminosilicate EDFAs, gain drops sharply beyond 1605nm. Several new or modified erbium host materials have been used to extend the amplification band to beyond the conventional L-band, such as tellurite, bismuth-oxide, antimony silicate, P-doped aluminosilicate, and phosphosilicate EDFAs. Although tellurite and bismuth-oxide based EDFAs have wider bandwidths compared to that of demonstrated phosphosilicate (P-Si) EDFAs, P-Si EDFAs have been shown to provide better noise performance when the gain bandwidth is extended to 1620 nm. In addition, unlike tellurite or bismuth-oxide fibers, P-Si EDF does not exhibit increased nonlinearity or weakened reliability, compared to conventional aluminosilicate EDFs. Furthermore, phosphosilicate erbium fiber is compatible with other silica fibers and can be fusion spliced to the standard SMF silica fiber with high return loss and extremely low splice loss. These properties make the P-Si EDF a top contender for commercial extended L-band EDFAs. One key issue in the design of the extended L-band amplifiers is the optimization of power conversion efficiency while keeping the noise figure low. In this paper, we explore various amplifier configurations and compare their performances experimentally. We report high-power P-Si EDFAs with simultaneous improvement of PCE and NF by a combination of a single-pass low-noise stage with one or two double-pass high-efficiency stages. The best configuration yields high power (22dBm), low NF (5.5dB maximum over 1570-1620 nm band), and high efficiency (27% overall PCE after gain flattening).

Citation Download Citation

Li Qian and Ryan Bolen "Erbium-doped phosphosilicate fiber amplifiers: a comparison of configurations for the optimization of noise figure and conversion efficiency", Proc. SPIE 5970, Photonic Applications in Devices and Communication Systems, 59702V (13 October 2005); https://doi.org/10.1117/12.628682

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available