Optical measurement of mechanical stresses in diamond-like carbon films

Ivan Ohlidal; Miloslav Ohlidal; Daniel Franta; Vladimir Cudek; Vilma Bursikova; Petr Klapetek; Milos Jakl

doi:10.1117/12.611744

14 February 2005 Optical measurement of mechanical stresses in diamond-like carbon films

Ivan Ohlidal, Miloslav Ohlidal, Daniel Franta, Vladimir Cudek, Vilma Bursikova, Petr Klapetek, Milos Jakl

Author Affiliations +

Proceedings Volume 5776, Eighth International Symposium on Laser Metrology; (2005) https://doi.org/10.1117/12.611744
Event: Eighth International Conference on Laser Metrology, 2005, Merida, Mexico

Abstract

In this paper the mechanical stresses taking place in diamond like thin films prepared by the plasma enhanced chemical vapor deposition onto silicon single crystal substrates are studied. For determination of the stress values the Stoney's formula is used. The values of the film thicknesses are determined using the combined method of variable angle spectroscopic ellipsometry and near-normal spectroscopic reflectometry. The values of the curvature radii of the deformed silicon substrates in consequence of the film stresses are evaluated using interferometric method based on two-beam interferometry and chromatic aberration method. The dependence of the mechanical stress inside these films on their thickness values is determined. It is found that this dependence can be approximate by the straight-line. The results achieved for the mechanical stresses obtained by both the optical methods, i.e. by the interferometric and chromatic aberration method, are compared. It is shown that within the experimental accuracy the stress values determined using both these method are identical. Thus, it is shown that the chromatic aberration method is suitable for measuring the mechanical stresses inside the thin solid films and it is the competitive method for the other optical methods utilized for this purpose so far.

Citation Download Citation

Ivan Ohlidal, Miloslav Ohlidal, Daniel Franta, Vladimir Cudek, Vilma Bursikova, Petr Klapetek, and Milos Jakl "Optical measurement of mechanical stresses in diamond-like carbon films", Proc. SPIE 5776, Eighth International Symposium on Laser Metrology, (14 February 2005); https://doi.org/10.1117/12.611744

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE