Paper
17 January 2005 Preparation and properties of highly c-axis-oriented Sr0.6Ba0.4Nb2O6 thin films by the sol-gel process
Author Affiliations +
Abstract
Highly oriented ferroelectric strontium barium niobate (Sr0.6Ba0.4Nb2O6) thin films were prepared on P-type Si(100) substrate by the Sol-Gel process. The XRD patterns of the SBN films show that SBN film prepared by using NbCl5, KOH as raw materials performed a highly c-axis preferred orientation perpendicular to the Si substrate, better than films that was prepared using Nb(OC2H5)5 as starting agents. It may be duo to the existence of the potassium ion that not be filtered out completely during the preparation of the niobium alkoxide. The characteristics of D-F and C-V curves were obtained for SBN/Si film. The film exhibits high dielectric constant. In order to investigate ferroelectric characteristics further, the P-E loops of the SBN/Pt/Si were also measured. The films show better optical properties, transmittance of Sr0.6Ba0.4Nb2O6 films on MgO(001) and SiO2 substrates was more than 60% at the range from 450 to 850nm, refractive index was measured to be 2.14 and 2.12 on the MgO and SiO2 substrate at 633nm respectively.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhiru Shen, Hui Ye, Tong Zou, and Bing Guo "Preparation and properties of highly c-axis-oriented Sr0.6Ba0.4Nb2O6 thin films by the sol-gel process", Proc. SPIE 5644, Optoelectronic Devices and Integration, (17 January 2005); https://doi.org/10.1117/12.574733
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Barium

Strontium

Niobium

Thin films

Sol-gels

Dielectrics

Raw materials

Back to Top