Design of a flexure-based alignment device for adjustable and stable mounting of optical components

Peter Giesen; Noenke van der Lee

doi:10.1117/12.560941

30 September 2004 Design of a flexure-based alignment device for adjustable and stable mounting of optical components

Peter Giesen, Noenke van der Lee

Proceedings Volume 5528, Space Systems Engineering and Optical Alignment Mechanisms; (2004) https://doi.org/10.1117/12.560941
Event: Optical Science and Technology, the SPIE 49th Annual Meeting, 2004, Denver, Colorado, United States

Abstract

Measurement systems such as systems based on interferometric combination of beams of light, require highly accurate alignment of optical components such as mirrors to achieve fringes. Moreover, the stability of such alignment mechanisms must be even higher. Alignment devices based on flexures provide accurate alignment with excellent resolution, without play or hysteresis. TNO TPD developed mechanisms for adjustment of mirrors in two degrees of freedom, meaning two rotations, and used these mechanisms in setups to achieve picometer stability. The paper describes the design process and the development of a set of alignment mechanisms. Theoretical and practical aspects are mentioned. First the design aspects for designing stable mounts are given, and then two mechanisms are described. The mechanisms consist of a monolithic adjustment mount for a mirror that is made by wire erosion in such a way that the mirror can rotate about two axes. Adjustment screws in combination with a lever and a gear provide easy and accurate adjustment of the rotation of the mirror. The combination of flexures result in a virtual point of rotation that is positioned on the centre of the mirror surface. In this case, the optical path length of the deflected light path will not change. Two degree of freedom rotation mechanisms have a generic design, so the design can be used in multiple instruments. The measurement systems show high stability of the components.

Citation Download Citation

Peter Giesen and Noenke van der Lee "Design of a flexure-based alignment device for adjustable and stable mounting of optical components", Proc. SPIE 5528, Space Systems Engineering and Optical Alignment Mechanisms, (30 September 2004); https://doi.org/10.1117/12.560941

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Mirrors

Optical components

Optical alignment

Optical mounts

Telescopic pixel displays

Motion measurement

Actuators

Show All Keywords

Keywords/Phrases

Search In:

Publication Years