Paper
24 May 2004 Quasi-Brewster angle technique for evaluating the quality of optical surfaces
Jue Wang, Robert L Maier
Author Affiliations +
Abstract
The requirements for optical surfaces have drastically increased for the deep-ultraviolet (DUV) and vacuum-ultraviolet (VUV) spectral regions. Low optical loss and laser durable fluoride optics are required for microlithographic applications. A nondestructive quasi-Brewster angle technique (qBAT) has been developed for evaluating the quality of optical surfaces including both top surface and subsurface information. The negative quasi-Brewster angle shift at wavelengths longer than 200 nm has been used to model the distribution of subsurface damage. By using effective medium approximation (EMA), the positive quasi-Brewster angle shift at wavelengths shorter than 200 nm has been explained by subsurface contamination. The top surface roughness (TSR) depicted by the qBAT is consistent with atomic force microscopy (AFM) measurements. The depth and the micro-porous structure of the subsurface damage measured by the qBAT, has been confirmed by magnetorheological finishing (MRF). The technique has been used to evaluate optically polished CaF2 (111) and MgF2 (001) surfaces.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jue Wang and Robert L Maier "Quasi-Brewster angle technique for evaluating the quality of optical surfaces", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.533034
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Surface finishing

Polishing

Magnetorheological finishing

Atomic force microscopy

Contamination

Deep ultraviolet

Surface roughness

Back to Top