Correlating scatterometry to CD-SEM and electrical gate measurements at the 90-nm node using TMU analysis

Matthew Sendelbach; Charles N. Archie; Bill Banke; Jason Mayer; Hideaki Nii; Pedro Herrera; Matt Hankinson

doi:10.1117/12.538009

24 May 2004 Correlating scatterometry to CD-SEM and electrical gate measurements at the 90-nm node using TMU analysis

Matthew Sendelbach, Charles N. Archie, Bill Banke, Jason Mayer, Hideaki Nii, Pedro Herrera, Matt Hankinson

Proceedings Volume 5375, Metrology, Inspection, and Process Control for Microlithography XVIII; (2004) https://doi.org/10.1117/12.538009
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

Currently, CD-SEMs are the tool of choice for in-line gate length measurements for most semiconductor manufacturers. This is in large part due to their flexibility, throughput, and ability to correlate well to physical measurements (e.g., XSEM). However, scatterometry is being used by an increasing number of manufacturers to monitor and control gate lengths. But can a scatterometer measure such small critical dimensions well enough? This paper explores this question by analyzing data taken from wafers processed using 90 nm node technology. These wafers were measured after gate formation (gate final CD) using a CD-SEM as well as a scatterometer. They were then processed into the back-end-of-line and measured electrically. This electrical measurement, called L_poly, is an important parametric device measurement and is used to screen product before it reaches final electrical test. It is therefore critical for the in-line metrology immediately after gate formation to have excellent correlation to L_poly. Analysis shows that the scatterometer correlates well to both in-line CD-SEM measurements across multiple structures as well as electrical L_poly measurements. More importantly, the scatterometer is shown to be approximately equivalent to the CD-SEM when both are correlated to L_poly. Since several scatterometry targets with different pitches were measured, the amount of correlation as a function of pitch is also investigated. Because traditional methods of correlation, such as Ordinary Least Squares (OLS), have severe limitations, Total Measurement Uncertainty (TMU) analysis is used as a highly effective assessment methodology. This paper also shows how TMU analysis is used to improve the scatterometry model and understand the relative contributions from obstacles that hinder the achievement of even better correlations.

Citation Download Citation

Matthew Sendelbach, Charles N. Archie, Bill Banke, Jason Mayer, Hideaki Nii, Pedro Herrera, and Matt Hankinson "Correlating scatterometry to CD-SEM and electrical gate measurements at the 90-nm node using TMU analysis", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.538009

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available