Paper
29 December 2003 Fabrication of ball-type spherical microlens array for optical fiber coupling
Ying-Ruel Huang, Hwai-Pwu Chou
Author Affiliations +
Abstract
This paper presents a ball type microlens made of photoresist SU-8, which allows light focusing in all directions on the substrate surface and thus provides application flexibility. We have developed a low temperature batch process that uses UV lithography for patterning, bulk machining for nozzle fabrication, and then pressing SU-8 through nozzles for ball formulation. A 24 x 24 lens array has been fabricated. The micro-balls can be made with diameters from 80 to 500 μm and focal lengths from 50 to 300 μm. Measurements indicated that the error of the diameter was within 3%; variations among batches are within 10%. The major contribution to the uncertainty is due to the uncertainty of the pressing force. Spectral density distribution measurements were also performed to verify the focusing ability of ball lenses. The measured numerical aperture is about 0.63 that is satisfactory for most micro-optical applications.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying-Ruel Huang and Hwai-Pwu Chou "Fabrication of ball-type spherical microlens array for optical fiber coupling", Proc. SPIE 5347, Micromachining Technology for Micro-Optics and Nano-Optics II, (29 December 2003); https://doi.org/10.1117/12.524226
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spherical lenses

Semiconducting wafers

Silicon

Optical fibers

Photoresist materials

Lithography

Microlens array

Back to Top