Paper
12 May 2004 980-nm broad-area diode laser coupled to a cylindrical lensed multimode fiber
Shizhe Shen, Quan J. Zhang, Yuanxiang Wang
Author Affiliations +
Proceedings Volume 5280, Materials, Active Devices, and Optical Amplifiers; (2004) https://doi.org/10.1117/12.520350
Event: Asia-Pacific Optical and Wireless Communications, 2003, Wuhan, China
Abstract
A theoretical model is presented to calculate the fiber coupling efficiency and alignment tolerances for the case of a 980nm 100μm broad-area diode laser directly coupled to a 100μm round-shaped cylindrical lensed multimode fiber. Both radius and wedge angle of the round-shaped cylindrical lens are optimized for maximum coupling efficiency. It is found that with proper design, a coupling efficiency of up to 98% may be obtained theoretically. The alignment tolerances for all three directions (vertical, horizontal, and axial offsets) are also calculated. It is found that the vertical offset (X-offset) tolerance is the most critical one among three, but is still acceptable (~2μm) for low-cost practical packaging. It is also found that the distance between the diode and the fiber, and the lens shape on the fiber can be further varied to improve this tolerance.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shizhe Shen, Quan J. Zhang, and Yuanxiang Wang "980-nm broad-area diode laser coupled to a cylindrical lensed multimode fiber", Proc. SPIE 5280, Materials, Active Devices, and Optical Amplifiers, (12 May 2004); https://doi.org/10.1117/12.520350
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tolerancing

Semiconductor lasers

Multimode fibers

Diodes

Broad area laser diodes

High power lasers

Packaging

Back to Top