Paper
30 April 2004 Computational modeling of optical fiber manufacture
Arthur Shirley, Yaping Lu
Author Affiliations +
Proceedings Volume 5279, Optical Fibers and Passive Components; (2004) https://doi.org/10.1117/12.520491
Event: Asia-Pacific Optical and Wireless Communications, 2003, Wuhan, China
Abstract
The key for optical fiber manufacturers to remaining profitable in today’s environment is cost reduction, requiring a hard look at raw material and processing costs to evaluate areas for savings and materials reduction. In this paper we examine the use of computational fluid dynamics (CFD) as a tool to study fiber-manufacturing processes. Specific examples are given of the use of CFD to analyze the consumption of helium as a coolant gas in fiber drawing, with the objective of showing that helium usage can be reduced by either optimizing the operation of existing cooling tubes or through improved cooling tube designs. With respect to the drawing of optical fiber, the cooling tubes should be ideally operated at their most efficient conditions such that the cooling capacity requirement is satisfied with minimum usage of cooling gas (e.g., helium). Optimization of the fiber cooling process can be realized by evaluating the cooling efficiencies of different designs of cooling tubes, and under different operating conditions. The use of CFD simulation can avoid mistakes and reduce the cost and time of process development.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Arthur Shirley and Yaping Lu "Computational modeling of optical fiber manufacture", Proc. SPIE 5279, Optical Fibers and Passive Components, (30 April 2004); https://doi.org/10.1117/12.520491
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Helium

Optical fibers

Optics manufacturing

Computational fluid dynamics

Computational modeling

Data modeling

Gases

Back to Top