Paper
5 August 2003 Constructing of cure monitoring system with piezoelectric ceramics for composite laminate
Nobuo Oshima, Kouichi Inoue, Shinya Motogi, Takehito Fukuda
Author Affiliations +
Abstract
The cure monitoring system with piezoelectric ceramics is constructed. An embedded type piezoelectric ceramics sensor with flat lead wires is developed. And the piezoelectric ceramics is embedded into composite laminate. A dummy piezoelectric ceramics is set in the autoclave oven. The impedance of the piezoelectric ceramics which is embedded in the composite laminate and that of the dummy piezoelectric ceramics are measured by a LCR meter. The piezoelectric ceramics have strong temperature dependency. The temperature dependency of the impedance of piezoelectric ceramics is corrected by the information from the dummy piezoelectric ceramics. A dielectric sensor is also embedded in the composite laminate as a reference sensor for the degree of cure. The change in calculated cure index shows good correspondence with change in the log ion viscosity which is measured by the dielectric cure monitoring sensor.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nobuo Oshima, Kouichi Inoue, Shinya Motogi, and Takehito Fukuda "Constructing of cure monitoring system with piezoelectric ceramics for composite laminate", Proc. SPIE 5056, Smart Structures and Materials 2003: Smart Structures and Integrated Systems, (5 August 2003); https://doi.org/10.1117/12.483451
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Composites

Sensors

Epoxies

Ions

Databases

Dielectrics

Back to Top