Strain energy harvesting for wireless sensor networks

David L. Churchill; Michael J. Hamel; Christopher P. Townsend; Steven W. Arms

doi:10.1117/12.483591

22 July 2003 Strain energy harvesting for wireless sensor networks

David L. Churchill, Michael J. Hamel, Christopher P. Townsend, Steven W. Arms

Proceedings Volume 5055, Smart Structures and Materials 2003: Smart Electronics, MEMS, BioMEMS, and Nanotechnology; (2003) https://doi.org/10.1117/12.483591
Event: Smart Structures and Materials, 2003, San Diego, California, United States

Abstract

Our goal was to demonstrate a robust strain energy harvesting system for powering an embedded wireless sensor network without batteries. A composite material specimen was laminated with unidirectional aligned piezoelectric fibers (PZT5A, 250 um, overall 13x10x.38 mm). The fibers were embedded within a resin matrix for damage tolerance (Advanced Cerametrics, Lambertville, NJ). A foil strain gauge (Micro-Measurements, Raleigh, NC) was bonded to the piezoelectric fiber and shunt calibrated. The specimen was loaded in three point cyclic bending (75 to 300 με peak) using an electrodynamic actuator operating at 60,120, and 180 Hz. Strain energy was stored by rectifying piezoelectric fiber output into a capacitor bank. When the capacitor voltage reached a preset threshold, charge was transferred to an integrated, embeddable wireless sensor node (StrainLink, MicroStrain, Inc., Williston, VT). Nodes include: 16 bit A/D converter w/programmable gain and filter, 5 single ended or 3 differential sensor inputs, microcontroller w/16 bit address, on-board EEPROM, and 418 MHz FSK RF transmitter. Transmission range was 1/3 mile (LOS, 1/4 wavelength antennas, 12 milliamps at +3 VDC). The RF receiver included EEPROM, XML output, and Ethernet connectivity. Received data from network nodes are parsed according to their individual addresses. The times required to accumulate sufficient charge to accomplish data transmission was evaluated. For peak strains of 150 με, the time to transmit was 30 to 160 seconds (for 180 to 60 Hz tests).

Citation Download Citation

David L. Churchill, Michael J. Hamel, Christopher P. Townsend, and Steven W. Arms "Strain energy harvesting for wireless sensor networks", Proc. SPIE 5055, Smart Structures and Materials 2003: Smart Electronics, MEMS, BioMEMS, and Nanotechnology, (22 July 2003); https://doi.org/10.1117/12.483591

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available