Paper
4 February 2003 Electronics and Acceptance Control System for the Gran Telescopio Canarias Commissioning Instrument
Ruben Flores, Gustavo Anguiano, Sadot Arciniega, Gerardo Lara, Beatriz Sanchez, Carlos Espejo, Salvador Cuevas, Vicente Bringas
Author Affiliations +
Abstract
This paper describes both the electronics design (ED) and the acceptance control system (ACS) of the Commissioning Instrument (CI) for the Gran Telescopio Canarias (GTC). The CI mainly comprises ten mechanisms accurately positioned by control algorithms, which in turn are programmed according to the CI operation modes. The control system is based on a CANopen protocol and is completely compatible with the GTC control system. CANopen is a serial communication protocol based on CAN bus. The CANopen features allow for the control system high reliability. A Reliability, Availability, Maintainability, and Safety (RAMS) analysis was carried out to guarantee the CI opto-mechanics and electronics performance.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruben Flores, Gustavo Anguiano, Sadot Arciniega, Gerardo Lara, Beatriz Sanchez, Carlos Espejo, Salvador Cuevas, and Vicente Bringas "Electronics and Acceptance Control System for the Gran Telescopio Canarias Commissioning Instrument", Proc. SPIE 4837, Large Ground-based Telescopes, (4 February 2003); https://doi.org/10.1117/12.458196
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electronics

Control systems

Switches

Reliability

Calibration

Sensors

Computer programming

RELATED CONTENT

SOXS control electronics design
Proceedings of SPIE (July 06 2018)
The on board calibration system of the X ray Imaging...
Proceedings of SPIE (July 18 2016)
Versatile cryogenic rotary-positioning systems
Proceedings of SPIE (November 01 1990)

Back to Top