Paper
3 March 2003 Microstructure characteristics and properties of in-situ formed TiC/Ni based alloy composite coating by laser cladding
Sen Yang, Wenjin Liu, Minlin Zhong
Author Affiliations +
Proceedings Volume 4831, First International Symposium on High-Power Laser Macroprocessing; (2003) https://doi.org/10.1117/12.497602
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
Abstract
Different weight ratio of nickel based alloy, titanium and graphite powders were mixed and then laser cladded onto carbon steel substrate to produce a surface metal matrix composite layer. The experimental results showed that the coating was uniform, continuous and free of cracks. An excellent bonding between the coating and the carbon steel substrate was ensured by the strong metallurgical interface. The microstructures of the coating were mainly composed of γ-Ni dendrite, M23C6, a small amount of CrB, and dispersed TiC particles, and the in-situ generated TiCp/matrix interfaces were clean and free from deleterious surface reaction. The morphologies of TiC particles changed from the global, cluster to flower-like shape, the volume fraction of TiCp and the microhardness gradually increased from the bottom to the top of the coating layer, and the maximum microhardness of the coating was about HV0.2850, 3 times larger than that of steel substrate. The volume fraction of TiC particles increased with increasing of volume fraction of Ti and C too.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sen Yang, Wenjin Liu, and Minlin Zhong "Microstructure characteristics and properties of in-situ formed TiC/Ni based alloy composite coating by laser cladding", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); https://doi.org/10.1117/12.497602
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Particles

Toxic industrial chemicals

Interfaces

Cladding

Nickel

Composites

Back to Top