Paper
3 March 2003 Application of YAG laser welding to gas turbine components
Shuho Tsubota, Masahiko Mega, Koji Takahashi, Yoshitaka Uemura, Norihide Hirota, Kengo Yamaguchi
Author Affiliations +
Proceedings Volume 4831, First International Symposium on High-Power Laser Macroprocessing; (2003) https://doi.org/10.1117/12.503147
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
Abstract
An investigation to apply YAG laser welding to gas turbine components was carried out. The materials of gas turbine such as Ni base alloy are difficult to weld by conventional arc welding methods because of large heat affection. But laser welding can reduce heat input compared with conventional methods and keeps the good repeatability. The welding parameter survey was carried out to satisfy the designing requirements. The YAG laser welding under appropriate conditions enables to prevent welding defects such as HAZ cracks and improves the weld joints quality and performance. Tensile test and low cycle fatigue test were carried out. Tensile strength and fatigue life of laser weld joints are same or higher than that of conventional manual TIG weld joints. The Automatic YAG laser welding system was also developed and put into practical use.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shuho Tsubota, Masahiko Mega, Koji Takahashi, Yoshitaka Uemura, Norihide Hirota, and Kengo Yamaguchi "Application of YAG laser welding to gas turbine components", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); https://doi.org/10.1117/12.503147
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
YAG lasers

Laser welding

Gas lasers

Nickel

Metals

Aluminum

Head

RELATED CONTENT

High-Power, High-Pulse-Rate Yag Laser Seam Welding
Proceedings of SPIE (December 30 1976)
Laser welding on trough panel: 3D body part
Proceedings of SPIE (March 03 2003)
Development of new type of nozzle for high power Nd...
Proceedings of SPIE (February 07 2000)
Welding Of Steel With A CO[sub]2[ sub] Laser Of 20...
Proceedings of SPIE (October 26 1989)
Laser technology for maintenance of nuclear pipe
Proceedings of SPIE (August 18 1997)

Back to Top