Paper
25 November 2002 Lightweight athermal optical system using silicon lightweight mirrors (SLMS) and carbon fiber reinforced silicon carbide (Cesic) mounts
Author Affiliations +
Abstract
A lightweight athermal optical system has been demonstrated using silicon lightweight mirrors (SLMS) manufactured by Schafer Corporation, mounted in carbon fiber reinforced silicon carbide mounts (C/SiC or Cesic) produced by IABG and ECM. SLMS are quickly and inexpensively super-polishable (figure of 0.021 waves rms @ 633 nm, 4 Å rms surface finish), stiff (first mode greater than 1500 Hz), lightweight (areal density <10 kg/m2), have superior thermal properties at cryogenic temperatures, and do not out-gas. Under a 1998 NASA Phase I SBIR, Schafer and IABG engineered the so-called A-3 formulation of Cesic, which has a near-perfect CTE match with silicon over the temperature range of 8-300 K, making it the ideal material to athermally mount SLMS. This paper presents results of the cryogenic testing of a 6-inch diameter flat SLMS-Cesic mount assembly at NASA GSFC from room temperature to 80K and back again.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William A. Goodman, Marc T. Jacoby, Matthias Kroedel, and David A. Content "Lightweight athermal optical system using silicon lightweight mirrors (SLMS) and carbon fiber reinforced silicon carbide (Cesic) mounts", Proc. SPIE 4822, Cryogenic Optical Systems and Instruments IX, (25 November 2002); https://doi.org/10.1117/12.452339
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Spatial light modulators

Cryogenics

Mirrors

Silicon carbide

Foam

Lightweight mirrors

RELATED CONTENT

Cryo-stability of HB-Cesic optics
Proceedings of SPIE (September 26 2011)
Open-cell silicon foam for ultralightweight mirrors
Proceedings of SPIE (September 28 1999)
SLMS athermal technology for high-quality wavefront control
Proceedings of SPIE (September 17 2007)
Results for silicon lightweight mirrors (SLMS)
Proceedings of SPIE (December 27 2001)
Cryogenic performance of lightweight SiC and C/SiC mirrors
Proceedings of SPIE (October 12 2004)
Actively cooled SLMS technology for HEL applications
Proceedings of SPIE (June 01 2005)

Back to Top