Paper
23 September 2002 Ultrasensitive gas detection using diode lasers and resonant photoacoustic spectroscopy
Author Affiliations +
Abstract
A novel trace-gas sensor system has been developed based on resonant photoacoustics, wavelength modulation spectroscopy, near-infrared diode lasers and optical fiber amplifiers that can achieve parts-per-billion sensitivity with a ten centimeter long sample cell and standard commercially-available optical components. An optical fiber amplifier with 500 mW output power is used to increase the photoacoustic signal by a factor of 25, and wavelength modulation spectroscopy is used to minimize the interfering background signal from window absorption in the sample cell, thereby improving the overall detection limit. This sensor is demonstrated with a diode laser operating near 1532 nm for detection of ammonia that achieves an ultimate sensitivity of less than 6 parts-per-billion. The minimum detectable fractional optical density, αminl, is 1.8x10-8, the minimum detectable absorption coefficient, αmin, is 9.5x10-10 cm-1, and the minimum detectable absorption coefficient normalized by power and bandwidth is 1.5x10-9 Wcm-1/&sqrt; Hz. These measurements represent the first use of fiber amplifiers to enhance photoacoustic spectroscopy, and this technique is applicable to all other species that fall within the gain curves of optical fiber amplifiers.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael E. Webber, Michael B. Pushkarsky, and C. Kumar N. Patel "Ultrasensitive gas detection using diode lasers and resonant photoacoustic spectroscopy", Proc. SPIE 4817, Diode Lasers and Applications in Atmospheric Sensing, (23 September 2002); https://doi.org/10.1117/12.452104
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoacoustic spectroscopy

Fiber amplifiers

Modulation

Absorption

Semiconductor lasers

Sensors

Optical amplifiers

RELATED CONTENT

Towards laser-based open-path detection of hydrogen sulfide
Proceedings of SPIE (December 23 2016)
Design of a balanced amplified photodetector based gas sensor
Proceedings of SPIE (December 12 2018)
Cavity enhanced spectroscopy for NO2 detection
Proceedings of SPIE (September 23 2005)
Fiber optic systems for remote laser spectroscopy
Proceedings of SPIE (April 28 1999)
Photoacoustic CO<sub>2</sub> detection at 2.7 &#956;m
Proceedings of SPIE (April 25 2006)
Modulation cancellation method for laser spectroscopy
Proceedings of SPIE (January 24 2011)

Back to Top