Paper
18 January 1985 Single Beam Method Of Manufacturing Holographic Optical Gratings
V. P. Aksenov
Author Affiliations +
Proceedings Volume 0473, Symposium Optika '84; (1985) https://doi.org/10.1117/12.942450
Event: Symposium Optika '84, 1984, Budapest, Hungary
Abstract
Experimental results of detailed measurements of periodic surface damage induced by pulses from a Nd:YAG laser radiation on surface of Ge samples and Ge films on Si02 substrate are reported. The periodic surface structures or ripples are created by the intensity modulation on the surface which is the result of the interference of incident laser beam and a coherently scattered surface waves (surface plasmons, grazing transversal waves, surface polaritons), which may be generated by photons at a rough surface. We consider a dependence of ripples growth rate from direction of incident light polarization, form of the laser spot, direction of surface wave travelling. The coherent extension of ripples from overlapping laser spots was observed for the grating with spasing d=λ/cosθ where θ is angle of incidence of laser beam, λ is wavelength of light. The optical grating with square near 2 cm2 was manufactured.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. P. Aksenov "Single Beam Method Of Manufacturing Holographic Optical Gratings", Proc. SPIE 0473, Symposium Optika '84, (18 January 1985); https://doi.org/10.1117/12.942450
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Germanium

Optics manufacturing

Diffraction gratings

Surface plasmons

Photons

Semiconductor lasers

Dielectrics

Back to Top