Monte Carlo method for highly efficient and accurate statistical lithography simulations

Sergei V. Postnikov; Kevin Lucas; Karl Wimmer; Vladimir Ivin; Andrey Rogov

doi:10.1117/12.474492

30 July 2002 Monte Carlo method for highly efficient and accurate statistical lithography simulations

Sergei V. Postnikov, Kevin Lucas, Karl Wimmer, Vladimir Ivin, Andrey Rogov

Proceedings Volume 4691, Optical Microlithography XV; (2002) https://doi.org/10.1117/12.474492
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

Recent years have shown a strong increase in the use of statistical lithography error analysis for process tuning and in making technology choices. Simulation has shown it can play an important role in this area by accurately predicting experimental critical dimension (CD) distributions. Earlier statistical lithography simulation work was based on the Response Surface Methodology. The response surface is built by simulating CD dependence on input lithography process variables of interest such as focus, dose, mask CD, resist thickness, etc. The process parameters are then sampled from the Gaussian distribution to generate the distribution of the resulting resist CDs. When a large number of input parameters are being considered in order to describe the important experimental variations, the computational runtime is rapidly increased due to the requirements to fully simulate an (N+1)-dimensional response surface, where N is the number of input parameters. The work we present here has improved the speed of statistical lithography simulations through the use of Monte Carlo technique. With this technique, the runtime of the simulations is independent of the number of input parameters. The technique can be used for 1D or 2D simulations. We present results benchmarked with 130 nm process data showing the usefulness, runtime improvements and accuracy of this method. We have also used Variable Threshold Resist model (VTRM) in conjunction with the Monte Carlo technique. VTRM was calibrated against experimental focus-exposure matrices at varying line width and pitch. The use of VTRM greatly improves the accuracy of the statistical results by the virtue of establishing a good fit to the experimental data, which can be quantified by the root mean squares of residuals. VTRM also significantly speeds up the computation, since it uses only aerial image calculation as opposed to full resist modeling. Simulation results produced by using VTRM closely match the experimental results through a range of pitches, mask line widths and various illumination conditions.

Citation Download Citation

Sergei V. Postnikov, Kevin Lucas, Karl Wimmer, Vladimir Ivin, and Andrey Rogov "Monte Carlo method for highly efficient and accurate statistical lithography simulations", Proc. SPIE 4691, Optical Microlithography XV, (30 July 2002); https://doi.org/10.1117/12.474492

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available