Design and modeling of microactuators in MEMS virtual reality prototyping CAD tool

Manisah Aumeerally; Renate Sitte

doi:10.1117/12.449146

21 November 2001 Design and modeling of microactuators in MEMS virtual reality prototyping CAD tool

Manisah Aumeerally, Renate Sitte

Proceedings Volume 4591, Electronics and Structures for MEMS II; (2001) https://doi.org/10.1117/12.449146
Event: International Symposium on Microelectronics and MEMS, 2001, Adelaide, Australia

Abstract

The design stage of the development of a MEMS device is crucial if its fabrication is to be right the first time. Computer-aided design (CAD) helps to accelerate this process and provides a cost-effective method in the prediction and optimization of device characteristics. This paper describes this design process, focusing on the conceptual design phase in the development of microactuators as part of the actuator component of a Virtual Reality-prototyping CAD tool. To create the functions and database required for this tool, the effects of parameters such as temperature, pressure, strain, acceleration etc., on the microactuator have to be evaluated. To achieve this, a comprehensive analysis of the most relevant parameters affecting the different types of microactuators based on their force-producing principle is required. This is a huge and lengthy task. It includes the estimation of mechanical performance of the device with variation in its geometrical structure and the optimization of the variations with respect to their static and dynamic performance, for example linearity and resonant frequency. It aids in the analysis of constraints in the geometrical design for robustness in its manufacture. In this paper we analyze the requirements, the functions and database entries, via an application case example for a membrane micropump. Its structure is studied in order to demonstrate the feasibility of using this device as a pump that is able to move air from one chamber to another. In this example we look at the underlying models that warrant a desired performance and whose calculations results in the geometries and operational parameters, such as the flow of air or liquid, the deflection of the membrane, etc. These results serve as input to the Virtual Reality Visualizations module and displayed with time and size scaled animations.

Citation Download Citation

Manisah Aumeerally and Renate Sitte "Design and modeling of microactuators in MEMS virtual reality prototyping CAD tool", Proc. SPIE 4591, Electronics and Structures for MEMS II, (21 November 2001); https://doi.org/10.1117/12.449146

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available