Paper
28 September 2001 Orthogonal method for processing of SU-8 resist in UV-LIGA
Jingquan Liu, Jun Zhu, Guipu Ding, Xiaolin Zhao, Bingchu Cai
Author Affiliations +
Proceedings Volume 4557, Micromachining and Microfabrication Process Technology VII; (2001) https://doi.org/10.1117/12.442980
Event: Micromachining and Microfabrication, 2001, San Francisco, CA, United States
Abstract
SU-8 is a negative, epoxy type, near-UV photoresist. The resist has been specifically developed for ultrathick, high-aspect-ratio MEMS-type applications. It has been proven to be very sensitive to process variations. In this paper, the orthogonal method is used in the process. While three processing parameters are used as control factors, experiments are performed and results are evaluated. As the results being analyzed, a proposed fabrication process is derived from optimizing the control factors. The output structure has straight sidewall profile, fine line and space resolution, and strong adhesion to substrate. The aspect ratio can be greater than 20 in the 200-um-thick resist. Furthermore, several metallic films are used as the substrates. The titanium film with oxidation treatment is found to have the stronger adhesion to the resist. The result will open possibilities for low-cost LIGA-type process for MEMS applications.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jingquan Liu, Jun Zhu, Guipu Ding, Xiaolin Zhao, and Bingchu Cai "Orthogonal method for processing of SU-8 resist in UV-LIGA", Proc. SPIE 4557, Micromachining and Microfabrication Process Technology VII, (28 September 2001); https://doi.org/10.1117/12.442980
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoresist materials

Oxidation

Titanium

Epoxies

Semiconducting wafers

Microelectromechanical systems

Near ultraviolet

Back to Top