Paper
18 December 2001 Integrated front-end electronics in a detector compatible process: source-follower and charge-sensitive preamplifier configurations
Lodovico Ratti, Massimo Manghisoni, Valerio Re, Valeria Speziali
Author Affiliations +
Abstract
This study is concerned with the simulation and design of low-noise front-end electronics monolithically integrated on the same high-resistivity substrate as multielectrode silicon detectors, in a process made available by the Istituto per la Ricerca Scientifica e Tecnologica (ITC-IRST) of Trento, Italy. The integrated front-end solutions described in this paper use N-channel JFETs as basic elements. The first one is based upon an all-NJFET charge preamplifier designed to match detector capacitances of a few picofarads and available in both a resistive and a non resistive feedback configuration. In the second solution, a single NJFET in the source-follower configuration is connected to the detector, while its source is wired to an external readout channel through an integrated capacitor.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lodovico Ratti, Massimo Manghisoni, Valerio Re, and Valeria Speziali "Integrated front-end electronics in a detector compatible process: source-follower and charge-sensitive preamplifier configurations", Proc. SPIE 4507, Hard X-Ray and Gamma-Ray Detector Physics III, (18 December 2001); https://doi.org/10.1117/12.450752
Lens.org Logo
CITATIONS
Cited by 18 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Field effect transistors

Electronics

Capacitance

Chemical elements

Transistors

Capacitors

Back to Top