Paper
5 December 2001 Evaluation of light-emitting diode lamps: a report to the city of Albuquerque
Author Affiliations +
Abstract
Sandia assessed white LED lamps for parking lot, security and bike path lighting for the City of Albuquerque. Powering these lamps with photovoltaics was of particular interest to the city. Eight commercially available lamps were tested; one was AC and all others were 12-volt DC. Because DC-only photovoltaic systems do not regulate output voltage, a 12-volt nominal photovoltaic system can see a voltage range from 10.5-15.3 volts. Therefore, the LED lamp must be specified for the DC voltage range expected with a photovoltaic system. We found several failed lamps at the high voltage range of our test, which is below voltages that can be seen in the field. In addition, LED lamps need to be more powerful and cost competitive, and temperature and lifetime issues need to be addressed in order to be more widely useful with photovoltaic systems for illumination applications. We concluded that presently available white LED lighting powered by photovoltaics could be considered for bike path lighting applications where the area is remote, or for security lighting in areas that are difficult to access. We do not recommend LED lamps for much larger flux levels such as parking lot lighting at this time.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marlene Brown "Evaluation of light-emitting diode lamps: a report to the city of Albuquerque", Proc. SPIE 4445, Solid State Lighting and Displays, (5 December 2001); https://doi.org/10.1117/12.450045
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lamps

Light emitting diodes

Light sources and illumination

LED lighting

Photovoltaics

Fourier transforms

Optical testing

RELATED CONTENT

LED illuminant on the ambient light
Proceedings of SPIE (September 18 2014)
Growing pains for new energy-saving technologies
Proceedings of SPIE (October 20 2004)
Reliability test of LED driven by PWM technique
Proceedings of SPIE (September 10 2008)

Back to Top