Paper
22 August 2001 Assessment of a visually coupled system (VCS) using a binocular helmet-mounted display (BHMD) and a steerable FLIR
Peter J. Longman, Thomas C. How, Craig Hudson, Geoffrey J. N. Clarkson
Author Affiliations +
Abstract
The Defence Evaluation Research Agency carried out an airborne demonstration and evaluation of a fast-jet Visually Coupled System (VCS) installed in ZD902, the Tornado Integrated Avionics Research Aircraft for the UK MOD. The installed VCS used a Head Steered Forward Looking Infra-Red (HSFLIR) sensor and a Head Tracking system to provide the pilot with an image of the outside world projected onto a Binocular Helmet Mounted Display. In addition to the sensor image, information such as aircraft altitude, attitude, and airspeed were also presented to the pilot through the HMD to eliminate the need to look inside the cockpit for critical flight data. The aim of the VIVIAN trial was to demonstrate by day and night the benefits of a fast-jet integrated HSFLIR and HMD as an aid to low level flight, navigation, target acquisition, take-off and landing. The outcome of this flight test program was very encouraging and, although testing has identified that improvements are necessary, in particular to HSFLIR image quality, Auto Gain Control performance, helmet fit and symbology design, test aircrew endorse the acceptability of a VCS.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter J. Longman, Thomas C. How, Craig Hudson, and Geoffrey J. N. Clarkson "Assessment of a visually coupled system (VCS) using a binocular helmet-mounted display (BHMD) and a steerable FLIR", Proc. SPIE 4361, Helmet- and Head-Mounted Displays VI, (22 August 2001); https://doi.org/10.1117/12.438002
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Head-mounted displays

Virtual colonoscopy

Head

Visualization

Image quality

Sensors

Image sensors

Back to Top