Paper
16 August 2001 Laterally movable gate FET (LMGFET) for on-chip integration of MEMS with electronics
Author Affiliations +
Abstract
Operation of a new device structure called Laterally Movable Gate Field Effect Transistor (LMGFET) is reported here. The device drain current changes linearly with lateral gate motion. A prototype test device was designed and fabricated in our laboratory. A novel three-mask LIGA compatible process was used for device fabrication. A comb drive structure was used to drive the movable gate. On the unoptimized test device, static sensitivity to gate position of 6.4 A/m was observed in saturation with zero gate to source voltage. For the ac drive voltage on the comb drive, a sensitivity of 3.2 nA change in drain current per volt of ac drive voltage were observed at a dc bias of 38 V. Significant improvement in device performance are possible with changes in device design. This, to our knowledge, is the first report on the operation of a LMGFET with a driven gate.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pratul K. Ajmera and In-Hyouk Song "Laterally movable gate FET (LMGFET) for on-chip integration of MEMS with electronics", Proc. SPIE 4334, Smart Structures and Materials 2001: Smart Electronics and MEMS, (16 August 2001); https://doi.org/10.1117/12.436609
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Field effect transistors

Oxides

Plating

Nickel

Copper

Electronics

Etching

Back to Top