Development and validation of anelastic-displacement-fields-based dynamic finite elements

Razvan Rusovici; Daniel J. Inman; George Andre Lesieutre

doi:10.1117/12.432715

2 July 2001 Development and validation of anelastic-displacement-fields-based dynamic finite elements

Razvan Rusovici, Daniel J. Inman, George Andre Lesieutre

Proceedings Volume 4331, Smart Structures and Materials 2001: Damping and Isolation; (2001) https://doi.org/10.1117/12.432715
Event: SPIE's 8th Annual International Symposium on Smart Structures and Materials, 2001, Newport Beach, CA, United States

Abstract

Sensitive mechanical or electrical components often require protection from the potentially damaging effects of vibration and shock loading. High-damping viscoelastic materials are usually used in the design of impact-absorbent components. Since shock transients are characterized by a broad frequency spectrum, it is imperative to properly model frequency dependence of material parameters over the frequency range of interest. The Anelastic Displacement Fields (ADF) method is used to incorporate frequency-dependence within a finite element formulation. This method considers the effect of material anelasticity on the displacement field, as opposed to directly modeling physical damping mechanisms. ADF-based, plane-stress, and plane-strain finite elements are developed in order to facilitate the modeling of complex viscoelastic structures. The governing equations and assumptions underlying the various finite element developments are presented. In this paper, corresponding finite element models are used to model shock propagation and absorption through viscoelastic beams. The model predictions are validated against wave propagation theory, which shows that ADF-based finite element models are capable of capturing wave propagation phenomena, such as geometric dispersion, and viscoelastic attenuation and dispersion of longitudinal waves in beams. The behavior of mechanical filters in realistic shock conditions is also investigated. ADF three-dimensional finite element models could thus be successfully employed to design mechanical filters, or compare the benefits of using one viscoelastic material over another for a given shock-mitigating task.

Citation Download Citation

Razvan Rusovici, Daniel J. Inman, and George Andre Lesieutre "Development and validation of anelastic-displacement-fields-based dynamic finite elements", Proc. SPIE 4331, Smart Structures and Materials 2001: Damping and Isolation, (2 July 2001); https://doi.org/10.1117/12.432715

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available