Paper
13 December 1983 Architectural Considerations in a Medical Magnetic Resonance Imaging Facility
William Pavlicek, Thomas F . Meaney, Malcolm Cutting, Irving I . Budish
Author Affiliations +
Proceedings Volume 0419, Application of Optical Instrumentation in Medicine XI; (1983) https://doi.org/10.1117/12.936032
Event: Application of Optical Instrumentation in Medicine XI, 1983, Atlanta, United States
Abstract
Initial discussions were carried out in May of 1981 regarding a suitable site for magnetic resonance imaging facility. At that time minimum information was available regrading the special environmental demands required for this new diagnostic modHlity. What was known for certain was that the whole body superconducting magnets were physically large (8 x 8 feet) and could not be delivered in a conventional elevator or through standard passage ways. The weight of a large superconducting magnet (fifteen thousand pounds) also precluded the siting of this unit above grade except in cases of special load bearing floors. For this reason it was decided to initiate discussions with an architectural firm to arrive at a suitable design for a standalone medical magnetic imaging facility. Initially, the siting criteria were based upon magnetic field strengths from two units of between 0.15 and 3.5 Tesla. In time however, discussions centered upon placing two magnets of 0.5 and 1.5 Tesla with a design basis for the facility of two units of 3.0 Tesla each.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William Pavlicek, Thomas F . Meaney, Malcolm Cutting, and Irving I . Budish "Architectural Considerations in a Medical Magnetic Resonance Imaging Facility", Proc. SPIE 0419, Application of Optical Instrumentation in Medicine XI, (13 December 1983); https://doi.org/10.1117/12.936032
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Magnetism

Copper

Reflectivity

Absorption

Electromagnetic radiation

Antennas

Receivers

Back to Top