Paper
21 July 2000 Assembly and alignment of three-aspherical-mirror optics for extreme ultraviolet projection lithography
Author Affiliations +
Abstract
We have assembled and aligned projection optics for extreme ultraviolet (EUV) lithography. The projection optics consists of three aspherical mirrors. First, the positions of the mirrors were coarsely adjusted using the side and back surface of the mirrors. Next, the mirrors were finely aligned to minimize the wavefront errors which were measured by an interferometer. The adjustable axes were selected according to the results of the analysis of the allowable error range. The compensation values for each adjustable axis were calculated by commercially available ray-tracing software. After the alignment procedure, the wavefront error of 3 nm RMS was achieved.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Katsumi Sugisaki, Tetsuya Oshino, Katsuhiko Murakami, Takeo Watanabe, Hiroo Kinoshita, Atsushi Miyafuji, Shigeo Irie, and Shigeru Shirayone "Assembly and alignment of three-aspherical-mirror optics for extreme ultraviolet projection lithography", Proc. SPIE 3997, Emerging Lithographic Technologies IV, (21 July 2000); https://doi.org/10.1117/12.390114
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Optical alignment

Extreme ultraviolet

Projection systems

Extreme ultraviolet lithography

Tolerancing

Wavefronts

Back to Top