Paper
30 December 1999 Electron-beam lithography simulation for mask making: V. Impact of GHOST proximity effect correction on process window
Chris A. Mack, Charles A. Sauer
Author Affiliations +
Abstract
As the requirements for photomask linewidth control continue to tighten, the necessity for performing proximity correction for electron beam mask exposure will increase. GHOST proximity effect correction is one method that can be used to ensure that critical dimension linearity over a large range of feature sizes meets mask user requirements. The GHOST strategy uses an additional exposure to correct for the backscatter component of the primary exposure. Because of the way the image using a GHOST correction is constructed, image contrast will be lower than exposures done without GHOST. This paper uses simulation to examine the process window that is available when GHOST is used and this process window is compared to that without GHOST. The effect of resist contrast on the process window is examined by simulating ZEP 7000 resist and comparing it to resists with other contrasts. The effects of dose, develop time, data bias and spot size on the process window are also examined.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chris A. Mack and Charles A. Sauer "Electron-beam lithography simulation for mask making: V. Impact of GHOST proximity effect correction on process window", Proc. SPIE 3873, 19th Annual Symposium on Photomask Technology, (30 December 1999); https://doi.org/10.1117/12.373314
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

Image quality

Photomasks

Photoresist processing

Raster graphics

Backscatter

Scattering

RELATED CONTENT


Back to Top