Paper
8 September 1999 Raman spectroscopy of amorphous diamond films prepared by ArF laser ablation as a function of carbon species
Wenjie Guan
Author Affiliations +
Proceedings Volume 3862, 1999 International Conference on Industrial Lasers; (1999) https://doi.org/10.1117/12.361119
Event: International Symposium on Industrial Lasers, 1999, Wuhan, China
Abstract
Amorphous carbon films were prepared by ArF (193 nm) pulsed laser deposition. Raman spectroscopy was employed to study the changes in the bonding of the carbon films as a function of the pulsed laser generated carbon plum, which was measured using optical transmittance diagnosis technique. The measurement and calculation reveal that the pulsed laser generated carbon plum contains two different part species. The center-of-mass velocity of the fast part is about 12000 m/s and the center-of-mass velocity of the slow part is about 50 m/s. The film correspond to the central part of the carbon plum with the most diamond-like properties is deposited by the fast part of the carbon species. Meanwhile, the film correspond to the outer part of the plum with lower fraction sp3-bonds is deposited by the slow part of the carbon species.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wenjie Guan "Raman spectroscopy of amorphous diamond films prepared by ArF laser ablation as a function of carbon species", Proc. SPIE 3862, 1999 International Conference on Industrial Lasers, (8 September 1999); https://doi.org/10.1117/12.361119
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Carbon

Raman spectroscopy

Pulsed laser operation

Diamond

Plasma

Particles

Laser ablation

Back to Top