Paper
3 August 1999 Aircraft-based in-situ calibration of a hot-wire anemometer in a compressible flow
Ronald J. Hugo, Scott R. Nowlin, Ila L. Hahn, Kenneth P. Bishop, Kimberley A. McCrae
Author Affiliations +
Abstract
High-bandwidth measurements of atmospheric velocity and temperature fluctuations in the high troposphere/low stratosphere using aircraft-based hot-wire anemometers requires calibration. An in-situ calibration characterizing wire sensitivity at high subsonic Mach numbers and relatively low temperatures and pressures was performed. Custom designed constant-temperature and constant-current anemometer equipment has been used for these atmospheric measurements. Two sets of calibration experiments are described, one in a controlled laboratory environment where the Mach number and temperature were varied and the other on board a C-135E aircraft. The aircraft test were conducted by varying the flight Mach number at different pressure altitudes while flying into an upper-level low pressure area, achieving variability in velocity, temperature, and pressure. Results obtained indicate increased sensitivity to velocity while operating the wire at a low overheat ratio. The calibration data was fit to a form of King's law which was found to work well for in-situ calibrations.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ronald J. Hugo, Scott R. Nowlin, Ila L. Hahn, Kenneth P. Bishop, and Kimberley A. McCrae "Aircraft-based in-situ calibration of a hot-wire anemometer in a compressible flow", Proc. SPIE 3706, Airborne Laser Advanced Technology II, (3 August 1999); https://doi.org/10.1117/12.356979
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Resistance

Temperature metrology

Sensors

Simulation of CCA and DLA aggregates

Fourier transforms

Velocity measurements

Back to Top