HgCdTe detectors and FPAs for remote sensing applications

Arvind I. D'Souza; Larry C. Dawson; Dan J. Berger; Stewart Clark; Priyalal S. Wijewarnasuriya; Jagmohan Bajaj; Jose M. Arias; William E. Tennant; Lester J. Kozlowski; Kadri Vural

doi:10.1117/12.354499

26 July 1999 HgCdTe detectors and FPAs for remote sensing applications

Arvind I. D'Souza, Larry C. Dawson, Dan J. Berger, Stewart Clark, Priyalal S. Wijewarnasuriya, Jagmohan Bajaj, Jose M. Arias, William E. Tennant, Lester J. Kozlowski, Kadri Vural

Author Affiliations +

Proceedings Volume 3698, Infrared Technology and Applications XXV; (1999) https://doi.org/10.1117/12.354499
Event: AeroSense '99, 1999, Orlando, FL, United States

Abstract

Short wavelength, middle wavelength, mid-long wavelength, long wavelength, and very long wavelength focal plane arrays (FPAs) are required for remote sensing applications. Advances in the Molecular Beam Epitaxy (MBE) growth of Mercury Cadmium Telluride (HgCdTe) and detector architectures utilized, have resulted in high performance detectors being fabricated in the 1 micrometers to 16 micrometers spectral range Custom Read Out Integrated Circuits (ROICs) are designed and fabricated to interface the HgCdTe detector arrays. The hybrid focal pane array is made up of the HgCdTe detector array and the CMOS-based ROIC. Hybrid FPAs performance parameters are presented. The HgCdTe detector material is used are grown by MBE on lattice matched CdZnTe substrates. Custom ROICs are fabricated in a commercial CMOS foundry. FPA D* performance values have been obtained for a multitude of spectral ranges and configurations that include; (i) (lambda) _c equals 1.8 micrometers , 12 X 256 arrays operating at 295 K with median D* approximately 1.4 X 10¹² cm Hz^1/2/W, (ii) (lambda) _c equals 10.5 micrometers , 256 X 256 arrays operating at 85 K with medina D* equals 3.9 X 10¹¹ cm Hz^1/2/W at a background flux (phi) _b equals 7.82 X 10¹⁵ ph/cm²-2 and (iii) (lambda) _c equals 15.8 micrometers at 65K, 128 X 128 array operating at 40K with peak D* of 2.76 X 10¹¹ cm Hz^1/2/W at a background flux (phi) _b equals 8.0 X 10¹⁵ ph/cm²- s. The performance of these FPAs will be presented.

Citation Download Citation

Arvind I. D'Souza, Larry C. Dawson, Dan J. Berger, Stewart Clark, Priyalal S. Wijewarnasuriya, Jagmohan Bajaj, Jose M. Arias, William E. Tennant, Lester J. Kozlowski, and Kadri Vural "HgCdTe detectors and FPAs for remote sensing applications", Proc. SPIE 3698, Infrared Technology and Applications XXV, (26 July 1999); https://doi.org/10.1117/12.354499

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available