Paper
12 February 1999 Optical parameters of endoscopic devices treated by different sterilization methods
Damian Andrzejewski, M. Jurga, Halina Podbielska M.D., J. Leszczyszyn
Author Affiliations +
Abstract
It is obvious that medical equipment must be sterile before it can be used for the patient's diagnosis or treatment. The frequently used sterilization methods are applying hot steam or ethanol. This can, however, cause damage to the delicate optical instruments, such as all kinds of endoscopes. Plasma sterilization is an alternative process, which is performed at much lower temperature (50 degree(s)). It is very effective regarding the sterility of cleaned devices, whereas it is less harmful to the instruments. In the study described, the optical transmittance of endoscopic optical systems which underwent several cycles of sterilization was measured. We have demonstrated that plasma process, compared to the hot steam process, is more protective of the optical instruments.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Damian Andrzejewski, M. Jurga, Halina Podbielska M.D., and J. Leszczyszyn "Optical parameters of endoscopic devices treated by different sterilization methods", Proc. SPIE 3567, Optical and Imaging Techniques for Biomonitoring IV, (12 February 1999); https://doi.org/10.1117/12.339189
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Plasma

Endoscopes

Transmittance

Endoscopy

Light

Waveguides

Fiber optics

RELATED CONTENT

The Diversity Of Fiber Optic Rotary Connectors (Slip Rings)
Proceedings of SPIE (February 04 1988)
Fibre Optics In Endoscopy
Proceedings of SPIE (August 30 1983)
U-optrode-based fiber optic thermometers
Proceedings of SPIE (May 09 2011)
Practical considerations for effective microendoscopy
Proceedings of SPIE (July 01 1991)

Back to Top