Paper
31 March 1998 Thermographic qualification of graphite/epoxy instrumentation racks
James L. Walker, Samuel S. Russell, Gary L. Workman
Author Affiliations +
Abstract
A nondestructive evaluation method is desired for ensuring the 'as manufactured' and 'post service' quality of graphite/epoxy instrumentation rack shells. The damage tolerance and geometry of the racks dictate that the evaluation method be capable of identifying defects, as small as 0.25 inch2 in area, over large acreage regions, tight compound radii and thickness transition zones. The primary defects of interest include voids, inclusions, delaminations and porosity. The potential for an IR thermographic inspection to replace ultrasonic testing for qualifying the racks as 'defect free' is under investigation. The inspection process is validated by evaluating defect standard panels built to the same specifications as the racks, except for the insertion of artificially fabricated defects. The artificial defects are designed to closely match those which are most prevalent in the actual instrumentation racks. A target defect area of 0.0625 inch2 was chosen for the defect standard panels to ensure the ability to find al defects of the critical size.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James L. Walker, Samuel S. Russell, and Gary L. Workman "Thermographic qualification of graphite/epoxy instrumentation racks", Proc. SPIE 3397, Nondestructive Evaluation of Aging Aircraft, Airports, and Aerospace Hardware II, (31 March 1998); https://doi.org/10.1117/12.305045
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Thermography

Manufacturing

Ultrasonics

Nondestructive evaluation

Aerospace engineering

Composites

Back to Top