Polymer waveguides for telecom, datacom, and sensor applications

Thomas Paatzsch; Ingo Smaglinski; Hans-Dieter Bauer; Wolfgang Ehrfeld

doi:10.1117/12.302386

15 March 1998 Polymer waveguides for telecom, datacom, and sensor applications

Thomas Paatzsch, Ingo Smaglinski, Hans-Dieter Bauer, Wolfgang Ehrfeld

Proceedings Volume 3276, Miniaturized Systems with Micro-Optics and Micromechanics III; (1998) https://doi.org/10.1117/12.302386
Event: Optoelectronics and High-Power Lasers and Applications, 1998, San Jose, CA, United States

Abstract

LIGA, the process sequence of deep lithography, electroforming and molding has been used for the fabrication of polymer waveguide components with passive fiber-to-chip coupling. The variety of 3D structures that can be realized, the high precision that can be achieved and especially the possibility of cost-effective mass production make these components most relevant for telecom, datacom and sensor applications. A novel waveguide design for a singlemode Y- splitter acting as telecommunication wavelengths was developed and realized together with the coupling scheme described above. It shows superior performance to conventional layouts and is ideally adapted to a fabrication using LIGA. Combining LIGA with high precision diamond machining multi-level tools with the complementary waveguide and fiber alignment structures were fabricated. For the first time a very high precision of better than 1 micrometers was achieved for heights and widths of all critical structures. A large number of molded parts was fabricated by hot embossing in PMMA. Detailed investigations proved that a reproducibility of better than 0.5 micrometers for the replicated structures is possible. By filling in a suitable core material into the waveguide prestructures and fixing fibers in the fiber grooves, fully pigtailed Y-splitters have been fabricated. This is an easy passive fiber-to-waveguide alignment with a significant reduction of manufacturing costs. First optical measurements on the samples showed an excess loss of 3.5 dB. Uniformity values were less than 0.6 dB and already meet Bellcore specifications. As another application of this fiber-to-waveguide coupling scheme a novel 4 X 4 star coupler for use in multimode optical bus systems is presented. First samples show an insertion loss of less than 9 dB and a uniformity better than 2 dB.

Citation Download Citation

Thomas Paatzsch, Ingo Smaglinski, Hans-Dieter Bauer, and Wolfgang Ehrfeld "Polymer waveguides for telecom, datacom, and sensor applications", Proc. SPIE 3276, Miniaturized Systems with Micro-Optics and Micromechanics III, (15 March 1998); https://doi.org/10.1117/12.302386

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available