Paper
20 April 1998 Reliability and degradation characteristics of semiconductor AlGaAs-based diode lasers operating between ~ 0.81 and 1.0 mm
Stephen O'Brien, Erik P. Zucker, Benjamin Li, Hanmin Zhao
Author Affiliations +
Abstract
High power diode lasers are important for a variety of applications including diode-pumped (DP) solid state lasers, DP fiber lasers/amplifiers and a variety of printing and medical applications. Recently, there have been significant advances in the maximum cw powers achieved from both multimode and singlemode lasers in both AlGaAs-based and InGaAsP- based materials. The highest powers from broad area lasers have been achieved with high quality AlGaAs-based materials. For example, cw powers of 11.3 and 16.5 W have been demonstrated at 870 nm from 100 and 200 micrometers wide apertures, respectively. These power levels correspond to a facet loading of 80-110 mW/micrometers and facet power densities of 27 MW/cm2 which are approximately 2-fold higher than previously reported results. In this paper we report on the performance, reliability and degradation characteristics of AlGaAs- based lasers.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen O'Brien, Erik P. Zucker, Benjamin Li, and Hanmin Zhao "Reliability and degradation characteristics of semiconductor AlGaAs-based diode lasers operating between ~ 0.81 and 1.0 mm", Proc. SPIE 3244, Laser-Induced Damage in Optical Materials: 1997, (20 April 1998); https://doi.org/10.1117/12.307024
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Reliability

Semiconductors

Fiber lasers

Continuous wave operation

Diode pumped solid state lasers

High power diode lasers

Back to Top