High-power diode laser marking and engraving of building materials

Lin Li; Jonathan Lawrence; Julian T. Spencer

doi:10.1117/12.281122

18 August 1997 High-power diode laser marking and engraving of building materials

Lin Li, Jonathan Lawrence, Julian T. Spencer

Proceedings Volume 3097, Lasers in Material Processing; (1997) https://doi.org/10.1117/12.281122
Event: Lasers and Optics in Manufacturing III, 1997, Munich, Germany

Abstract

A Diomed 60W-cw high power diode laser (HPDL) has been used for the marking and engraving of various building materials, including; marble, granite, clay tiles, ceramic tiles, roof tiles, ordinary Portland cement (OPC) and clay bricks. Morphological and microstructural characteristics have been investigated. The basic mechanism of marking/engraving and the characteristics of the beam absorption are discussed. The effects of material texture, color and laser processing parameters are reported. The work shows that engraving depths of over 2 mm (0.75 mm for a single pass) can be achieved on marble substrates by thermal disintegration of CaCO₃ into loose CaO powder and CO₂ gas. Uniform amorphous glazed lines (1 - 3 mm line width) of a color different from the untreated materials can be generated on clay tiles, ceramic tiles, roof tiles, clay bricks and OPC by solidification phase formation after laser melting of these materials. Effects of atmospheric conditions, for instance using O₂ and Ar gas shrouds, have been examined, with different colored marks being observed when different shroud gases are used. To demonstrate the practical worth of the process a UMIST crest has been marked on a ceramic tile using the system. Laser beam reflectivity is found to depend not only on material composition but also its color. Reflectivity has been found to range between 12% to 18% for the various construction materials used in the experiment, except for marble (grey) which showed over 27% reflectivity. Since the HPDL is a portable device, on-site application of these processing techniques can be realized, which would be either impossible or difficult when using other types of lasers.

Citation Download Citation

Lin Li, Jonathan Lawrence, and Julian T. Spencer "High-power diode laser marking and engraving of building materials", Proc. SPIE 3097, Lasers in Material Processing, (18 August 1997); https://doi.org/10.1117/12.281122

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available