Paper
8 December 1997 Wavefront control of optical components by laser-ablative figuring
Takahisa Jitsuno, Tomoyoshi Akashi, Masahiro Nakatsuka, Sadao Nakai, Keiu Tokumura
Author Affiliations +
Proceedings Volume 3047, Solid State Lasers for Application to Inertial Confinement Fusion: Second Annual International Conference; (1997) https://doi.org/10.1117/12.294329
Event: Second International Conference on Solid State Lasers for Application to ICF, 1996, Paris, France
Abstract
A new method for figuring the surface profile of optical plastics and optical glass have been proposed and demonstrated. An ArF excimer laser is used to ablate very thin layer of the surface of the substrates. The shape of the ablated surface is monitored by an interferometer in site condition. The ablation rate of PMMA is 0.08 micrometers per pulse at the energy density of 50 mJ/cm2. The optical glass (BK-7) can be ablated 0.15 micrometers per pulse at the fluence of 1.5 J/cm2.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takahisa Jitsuno, Tomoyoshi Akashi, Masahiro Nakatsuka, Sadao Nakai, and Keiu Tokumura "Wavefront control of optical components by laser-ablative figuring", Proc. SPIE 3047, Solid State Lasers for Application to Inertial Confinement Fusion: Second Annual International Conference, (8 December 1997); https://doi.org/10.1117/12.294329
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Laser ablation

Laser optics

Excimer lasers

Polymethylmethacrylate

Wavefronts

Modulation

RELATED CONTENT

UV laser ablative figuring of precise optics
Proceedings of SPIE (February 01 2000)
Comparison of 3D surfaces produced by 248 nm and 193...
Proceedings of SPIE (October 05 1998)
Microstructuring by excimer laser
Proceedings of SPIE (September 19 1995)
Process analysis of boring with pulsed-laser irradiation
Proceedings of SPIE (January 14 2000)

Back to Top