Micro-optical and optomechanical systems fabricated by the LIGA technique

Juergen Mohr; Jost Goettert; Andre Mueller; Patrick Ruther; Klaus Wengeling

doi:10.1117/12.271424

11 April 1997 Micro-optical and optomechanical systems fabricated by the LIGA technique

Juergen Mohr, Jost Goettert, Andre Mueller, Patrick Ruther, Klaus Wengeling

Proceedings Volume 3008, Miniaturized Systems with Micro-Optics and Micromechanics II; (1997) https://doi.org/10.1117/12.271424
Event: Photonics West '97, 1997, San Jose, CA, United States

Abstract

The LIGA process is used to fabricate micro-optical benches which allow to mount hybridically active and passive optical components with very high precision and without active alignment. Moreover, also micro mechanical structures like electro-mechanical actuators are fabricated on the same substrate. To avoid any lateral misalignment al fixing structures in the optical bench are produced in the lithography step. Due to the high precision of x-ray lithography lateral tolerances are in the range of 0.1 to 0.2 micrometers depending on thermal distortions. Thus, optical losses for these components are rather small. The potential of the free space concept based on LIGA technology for the fabrication of devices for optical telecommunication has been demonstrated by a bi-directional transceiver module as well as an optical bypass. In the case of the optical bypass element, a movable mirror is fabricated on the substrate together with the fixing elements. This movable mirror is the end face of an electro-static actuator which allows to move the mirror into the collimated light beam between two fibers and thus, change the direction of the light. For the first prototypes the losses in the beam without mirror are about 1.7 dB, whereas the losses in the deflected beam are about 4.5 dB.

Citation Download Citation

Juergen Mohr, Jost Goettert, Andre Mueller, Patrick Ruther, and Klaus Wengeling "Micro-optical and optomechanical systems fabricated by the LIGA technique", Proc. SPIE 3008, Miniaturized Systems with Micro-Optics and Micromechanics II, (11 April 1997); https://doi.org/10.1117/12.271424

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available