Paper
4 April 1997 Design of an electro-optic directional coupler with four sections poled in four perpendicular directions
Author Affiliations +
Abstract
Directional couplers with four sections poled in four perpendicular directions are proposed for the first time as a new electro-optic switch configuration in which complete conversion of both TE and TM light from one waveguide to the other can be achieved simultaneously by a low driving voltage adjustment. The perpendicularly poled sections of the switch make the device completely polarization- independent, and the inversely poled sections offer an extremely relaxed fabrication tolerance for the device. This configuration of each section poled in a different direction also makes it possible to drive the electro-optic coupler with a uniform electrode, which ensures high-speed operation of the device. Both the switching characteristics and the fabrication tolerance are simulated.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
ZuZhou Yue, Guohua Cao, John Martin Taboada, Jeffery J. Maki, Suning Tang, and Ray T. Chen "Design of an electro-optic directional coupler with four sections poled in four perpendicular directions", Proc. SPIE 3005, Optoelectronic Interconnects and Packaging IV, (4 April 1997); https://doi.org/10.1117/12.271085
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Directional couplers

Switches

Tolerancing

Polarization

Waveguides

Electro optics

Electrodes

Back to Top