Plasma etching of Cr films in the fabrication of photomasks: II. a comparison of etch technologies and a first look at defects

Thomas P. Coleman; Peter D. Buck; David J. Johnson

doi:10.1117/12.262796

27 December 1996 Plasma etching of Cr films in the fabrication of photomasks: II. a comparison of etch technologies and a first look at defects

Thomas P. Coleman, Peter D. Buck, David J. Johnson

Author Affiliations +

Proceedings Volume 2884, 16th Annual BACUS Symposium on Photomask Technology and Management; (1996) https://doi.org/10.1117/12.262796
Event: 16th Annual BACUS Symposium on Photomask Technology and Management, 1996, Redwood City, CA, United States

Abstract

The advanced requirements for resolution, critical dimension control, and linearity on photomasks require chromium etch processes, which are highly anisotropic and extremely uniform. They must also allow lithographers to expose the resist at the iso-focal point of the exposure system. A reactive ion etching (RIE) process of chromium films, previously reported, met some of these demands. However, it was reported that system loading effects significantly reduced the etch rate, etch rate uniformity, and CD uniformity. An alternative plasma etch system technology, inductively coupled plasma (ICP), has been investigated, which makes it possible to achieve much higher plasma densities, operate at lower pressures, and control ion energies independently. The combination of these features minimizes loading effects, makes it easier to control selectivity, accelerates etch rates, decreases undercutting,a nd improves etch uniformity. This allows the maskmaker to transfer the resist image into the chrome with minimal nominal CD shift and degradation of CD uniformity. Furthermore, with little or no undercutting, resolution and CD linearity are greatly improved. Results using the ICP configuration will be presented and compared with the RIE process. Preliminary studies of defects will be presented. Defect densities will be quantified using a plasma etch process and compared to a wet etch process. Sources of defects and possible solutions to defect reduction will be discussed.

Citation Download Citation

Thomas P. Coleman, Peter D. Buck, and David J. Johnson "Plasma etching of Cr films in the fabrication of photomasks: II. a comparison of etch technologies and a first look at defects", Proc. SPIE 2884, 16th Annual BACUS Symposium on Photomask Technology and Management, (27 December 1996); https://doi.org/10.1117/12.262796

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available