Paper
12 November 1996 0.1-deg/h DSP-controlled fiber optic gyroscope
Mauricio A. Ribes, Guenter Spahlinger, Manfred W. Kemmler
Author Affiliations +
Abstract
This paper describes a 0.1 deg/hr fiber optic gyroscope (FOG) controlled exclusively by a high-speed digital signal processor (DSP). The sampling time of all control loops equals the transition time of the light through the sensor coil. The device uses a 500 m fiber sensor coil and operates in closed-loop mode. The control and compensation algorithms where implemented in software and are carried out by a single high-speed DSP. The processor also takes care of the communication protocol via a high-speed synchronous serial bus. This single-axis FOG was designed in a modular structure and is the basic building block for the LFK95 system; a low-cost maritime gyrocompass for commercial applications. The system also fulfills serial bus, maritime gyroscompass, modular structure.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mauricio A. Ribes, Guenter Spahlinger, and Manfred W. Kemmler "0.1-deg/h DSP-controlled fiber optic gyroscope", Proc. SPIE 2837, Fiber Optic Gyros: 20th Anniversary Conference, (12 November 1996); https://doi.org/10.1117/12.258180
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Sensors

Analog electronics

Fiber optic gyroscopes

Interfaces

Digital electronics

Light sources

RELATED CONTENT

Closed-loop fiber optic gyro triad
Proceedings of SPIE (February 01 1992)
Design of a commercial small-volume fiber optic gyro
Proceedings of SPIE (November 12 1996)
Transmission Of Tri-Dimensional Moving Pictures
Proceedings of SPIE (December 13 1983)
Recent developments in superconducting cavity RF control
Proceedings of SPIE (February 23 2005)

Back to Top