Paper
8 September 1995 Design, fabrication, and testing of micro-optical sensors containing multiple aspheres
Slobodan Rajic, Charles M. Egert, Boyd M. Evans III, Joseph P. Cunningham, Troy A. Marlar
Author Affiliations +
Abstract
The micro-sensor field is presently proliferating with designs and approaches. We have developed a micro-spectrometer for sensing applications containing five precision surfaces, including two off-axis aspheres. The entire monolith is less than six cubic centimeters in volume. This particular design contains a bandwidth of about 2 micrometers which is centered at 980 nm. Once an appropriate starting substrate was produced, the entire system was diamond turned to maintain the required surface figure, inter-surface spacing, and surface tilts. Only three diamond turned fixtures were needed to produce the monolith. The results proved to be more than adequate for many sensing applications. Slightly altered designs could easily be produced containing different bandwidths and resolutions as needed by the customer. Due to the spectrum of interest and the fabrication method, PMMA was the material chosen for this sensor. Other designs configurations incorporating BK7 and sapphire are presently being studied.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Slobodan Rajic, Charles M. Egert, Boyd M. Evans III, Joseph P. Cunningham, and Troy A. Marlar "Design, fabrication, and testing of micro-optical sensors containing multiple aspheres", Proc. SPIE 2536, Optical Manufacturing and Testing, (8 September 1995); https://doi.org/10.1117/12.218452
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optics manufacturing

Optical spheres

Sensors

Diamond turning

Aspheric lenses

Calibration

Optical design

Back to Top