Paper
9 May 1994 Simulation of the influence of different liquids for ink jets under the aspect of color printing
Joachim Patzer, Eberhard P. Hofer, Gerhard Beurer
Author Affiliations +
Proceedings Volume 2171, Color Hard Copy and Graphic Arts III; (1994) https://doi.org/10.1117/12.175295
Event: IS&T/SPIE 1994 International Symposium on Electronic Imaging: Science and Technology, 1994, San Jose, CA, United States
Abstract
In this paper an improved three-dimensional model of a bubble-jet printhead is presented. It is based on the governing physical phenomena of the bubble growth and its subsequent collapse. It contains the complete heat conduction through the different layers and a realistic geometry of the firing chamber and the nozzle. Furthermore, the temperature dependence of various thermodynamic parameters such as the densities of liquid and vapor, the heat of vaporization and the thermal conductivity of most of the substances are included. Numerous parameter studies have been carried out: water was chosen as test liquid for comparison reasons with other models. The complicated properties of ink on the basis of empirical formulae for mixtures are included also. For this improved model, first, water/diethylene glycol mixtures with various concentration ratios and second, different dyes are included in the model simulations. The results are supported by experimental studies which have been carried out in our inkjet laboratory.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joachim Patzer, Eberhard P. Hofer, and Gerhard Beurer "Simulation of the influence of different liquids for ink jets under the aspect of color printing", Proc. SPIE 2171, Color Hard Copy and Graphic Arts III, (9 May 1994); https://doi.org/10.1117/12.175295
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

3D modeling

Temperature metrology

Color printing

Data modeling

Physical phenomena

Thermodynamics

Back to Top