Paper
9 March 1994 Cr:YAG fluorescence decay for optical-fiber temperature sensors
Vito C. Fernicola, Luigi Crovini
Author Affiliations +
Proceedings Volume 2070, Fiber Optic and Laser Sensors XI; (1994) https://doi.org/10.1117/12.169930
Event: Optical Tools for Manufacturing and Advanced Automation, 1993, Boston, MA, United States
Abstract
The fluorescent decay time of Cr:YAG single crystals has been determined from room temperature to 300 degree(s)C in order to develop optical-fiber temperature sensors. The sensing crystal was placed at the common end of a bifurcated optical fiber with the two legs connected to the excitation source and to the photodetector, respectively. A 636-nm laser diode pulsed excitation was used to stimulate the emission of the sensitive material and the observed decay was related to the fluorescent lifetime. The absolute fluorescence lifetime was estimated by means of an exponential-decay model, which included baseline offset and noise, to within 0.2%. The calibration and estimation processes were repeated with four different Cr:YAG crystals in order to evaluate the intrinsic repeatability of the material in view of realizing a multi-probe optical-fiber thermometer with full sensor interchangeability. A two- level kinetic model was applied in order to derive the decay-time-versus-temperature curve. The results show that this model fits the experimental data with a standard error of the estimate of 1.6 microsecond(s) , that is comparable with experimental uncertainty. As a consequence of the modeling results we predict that, with the described technique, the upper temperature limit of a single probe can be extended to 400 degree(s)C with a measurement error to within +/- 1 degree(s)C.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vito C. Fernicola and Luigi Crovini "Cr:YAG fluorescence decay for optical-fiber temperature sensors", Proc. SPIE 2070, Fiber Optic and Laser Sensors XI, (9 March 1994); https://doi.org/10.1117/12.169930
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Crystals

Luminescence

Temperature metrology

Calibration

Fiber optics sensors

Optical fibers

Back to Top